SET MENU

1 SOUND MENU

Use this menu to manually adjust any speaker settings or compensate for video signal processing delays when using LCD monitors or projectors.

;MANUAL SETUP

 

;MANUAL SETUP

 

1 SOUND MENU

1/2

1 SOUND MENU

2/2

. A)SPEAKER SET

 

. F)DYNAMIC RANGE

 

B)SP LEVEL

 

G)AUDIO SET

 

C)SP DISTANCE

 

H)HDMI SET

 

D)CENTER GEQ

 

 

 

E)LFE LEVEL

 

[p]/[p]:Up/Down

 

[p]/[p]:Up/Down

 

 

[ENTER]:Enter

 

[ENTER]:Enter

 

Speaker settings A)SPEAKER SET

Use this feature to manually adjust any speaker settings.

FRONT B speaker setting FRONT B

Use this feature to select the location of the front speakers connected to the FRONT B terminals.

Choices: FRONT, ZONE B

1 SOUND MENU

A)SPEAKER SET

FRONT B;;;;FRONT

[p]/[p]:Up/Down [p]/[[]:Select

• Select “FRONT” to turn on or off SPEAKERS A and B when the speakers connected to the FRONT B terminals are set in the main zone.

• Select “ZONE B” if the speakers connected to the FRONT B terminals are set in another zone. If SPEAKERS A is turned off and SPEAKERS B is turned on, all the speakers including the subwoofer in the main zone are muted and this unit outputs sound at the FRONT B terminals only.

Notes

If you connect headphones to the PHONES jack of this unit, the sound is output from both headphones and the FRONT B terminals when “FRONT B” is set to “ZONE B”.

If a DSP program is selected when “FRONT B” is set to “ZONE B”, this unit automatically enters the Virtual CINEMA DSP mode (see page 38).

Woofer section of a speaker is 16 cm (6.5 in) or larger: large

Woofer section of a speaker is smaller than 16 cm (6.5 in): small

Front speakers FRONT SP

Choices: SMALL, LARGE

1 SOUND MENU

A)SPEAKER SET

FRONT SP

SMALL >LARGE

When the front speakers are large

Select “LARGE” (large).

When the front speakers are small

Select “SMALL” (small).

Note

When “LFE/BASS OUT” is set to “FRONT” (see page 51), you can select only “LARGE” in “FRONT SP”. If the value of “FRONT SP” is set to a setting other than “LARGE” in advance, this unit automatically changes the value to “LARGE”.

Center speaker CENTER SP

Choices: NONE, SML, LRG

1 SOUND MENU

A)SPEAKER SET

CENTER SP

NONE >SML LRG

When the center speaker is large

Select “LRG” (large).

When the center speaker is small

Select “SML” (small).

When you do not use the center speaker

Select “NONE” (none). The center channel signals are directed to the front left and right speakers.

50 En

Page 52
Image 52
Yamaha DSP-AX463 owner manual 50 En, Speaker settings Aspeaker SET