Yamaha DSP-AX463 owner manual Specifications, 75 En, Audio Section, Video Section, General

Specifications

AUDIO SECTION

• Minimum RMS Output Power for Front, Center, Surround

1 kHz, 0.9% THD, 6 Ω	105 W
• Dynamic Power
IHF, 6/4/2 Ω	100/110/125 W
• Maximum Input Signal
CD, etc. Effect On, 1 kHz, 0.5% THD	2.0 V or more
• Frequency Response
CD, etc. to Front L/R	10 Hz to 100 kHz, –3 dB
• Total Harmonic Distortion
1 kHz, 50 W, Front L/R, 6 Ω	0.06% or less
• Signal to Noise Ratio (IHF-A Network)
CD (200 mV) to Front L/R, Effect Off	98 dB or more
CD (250 mV) to Front L/R, Effect Off	100 dB or more
• Residual Noise (IHF-A Network)
Front L/R	150 µV or less
• Channel Separation (1 kHz/10 kHz)
CD, etc. (5.1 kΩ shorted) to Front L/R
...................................................................	60 dB/45 dB or more
• Tone Control (Front L/R)
BASS Boost/Cut	±10 dB/100 Hz
TREBLE Boost/Cut	±10 dB/20 kHz
• Headphone Jack Rated Output/Impedance	400 mV/470 Ω
• Input Sensitivity/Input.................................................................Impedance	200 mV/47 kΩ
CD, etc.
MULTI CH INPUT	200 mV/47 kΩ
• Output Level/Output Impedance	200 mV/1.2 kΩ
AUDIO OUT (REC)
SUBWOOFER OUTPUT	4 V/1.2 kΩ

•Filter Characteristics (fc=40/60/80/90/100/110/120/160/200 Hz) H.P.F.

(FRONT SP, CENTER SP, SUR. L/R SP:

SMALL/SML)	12 dB/oct.
L.P.F. (Subwoofer)	24 dB/oct.

VIDEO SECTION

• Video Signal Type (Gray back)		PAL
• Signal Level		1 Vp-p/75 Ω
Composite
Component	1 Vp-p/75 Ω (Y), 0.7 Vp-p/75 Ω (PB/PR)
• Signal to Noise Ratio		50 dB or more
• Maximum Input Level		1.5 Vp-p or more
• Frequency Response (MONITOR OUT)
Component Signal		5 Hz to 60 MHz, –3 dB

GENERAL

• Power Supply	230 V AC, 50 Hz
• Power Consumption	240 W
• Standby Power Consumption	0.8 W
• Dimensions (W x H x D)	435 x 151 x 352 mm
	(17-1/8” x 5-15/16” x 13-7/8”)
• Weight	8.5 kg (18 lbs 12 oz)

* Specifications are subject to change without notice.

INFORMATION ADDITIONAL

English

75 En