Yamaha DSP-AX463 owner manual 67 En, Before Auto Setup, During Auto Setup

Troubleshooting

■AUTO SETUP

Before AUTO SETUP

Error message	Cause	Remedy	See
			page
Connect MIC!	Optimizer microphone is not connected.	Connect the supplied optimizer microphone	23
		to the OPTIMIZER MIC jack on the front
		panel.
Unplug HP!	Headphones are connected.	Unplug the headphones.	—
During AUTO SETUP
Error message	Cause	Remedy	See
			page
E-1:NO FRONT SP	Front L/R channel signals are not detected.	Check the front L/R speaker connections.	11
E-2:NO SUR.SP	A surround channel signal is not detected.	Check the surround speaker connections.	11
E-4:NOISY	Background noise is too loud.	Try running “AUTO SETUP” in a quiet	—
		environment.
		Turn off noisy electric equipment like air	—
		conditioners or move them away from the
		optimizer microphone.
E-6:NO MIC	The optimizer microphone was unplugged	Connect the supplied optimizer microphone	23
	during the “AUTO SETUP” procedure.	to OPTIMIZER MIC jack on the front
		panel.
E-7:NO SIGNAL	The optimizer microphone does not detect	Check the microphone setting.	23
	test tones.
		Check the speaker connections and	10, 11,
		placement.	23
E-8:USER CANCEL	The “AUTO SETUP” procedure was	Run “AUTO SETUP” again.	23
	cancelled due to user activity.
				ADDITIONAL INFORMATION
E-9:INTERNAL ERROR	An internal error occurred.	Run “AUTO SETUP” again.	23

English

67 En