Yamaha DSP-AX463 38 En, Enjoying 2-channelsources using the, standard decoders, Silent Cinema

Sound field programs

■Enjoying 2-channel sources using the

standard decoders

Signals input from 2-channel sources can also be played back on multi-channels.

Press 4AMP and then press OSUR. DECODE repeatedly to select a decoder.

You can select from the following decoders depending on the type of source you are playing and your personal preference.

Decoder	Functions
Pro Logic	Dolby Pro Logic processing for any
	sources
PLII Movie	Dolby Pro Logic II processing for
	movie sources
PLII Music	Dolby Pro Logic II processing for
	music sources
PLII Game	Dolby Pro Logic II processing for
	game sources

■Using sound field programs without surround speakers

(Virtual CINEMA DSP)

Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers.

If you set “SUR. L/R SP” to “NONE” (see page 51), Virtual CINEMA DSP is automatically activated whenever you select a CINEMA DSP program (see page 37).

Note

Virtual CINEMA DSP will not be activated even when

“SUR. L/R SP” is set to “NONE” (see page 51) in the following cases:

–when “5ch Stereo” (see page 37) is selected.

–when headphones are connected to the PHONES jack.

■Enjoying multi-channel sources and sound field programs with headphones

(SILENT CINEMA)

SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA is automatically activated whenever you connect headphones to the PHONES jack while listening to CINEMA DSP sound field programs (except for 5ch Stereo) (see page 37). When activated, the SILENT CINEMA indicator lights up in the front panel display.

■Enjoying unprocessed input sources

(Straight decoding mode)

When this unit is in the “STRAIGHT” mode, multi- channel sources are decoded straight into the appropriate channels without any additional effect processing. 2- channel stereo sources are output from only the front left and right speakers.

Press H STRAIGHT (or press 4AMP and then press BSTRAIGHT) to select “STRAIGHT”.

To deactivate the “STRAIGHT” mode, press

HSTRAIGHT (or press 4AMP and then

BSTRAIGHT) again so that “STRAIGHT” disappears from the front panel display.

38 En