Yamaha DSP-AX463 51 En, Surround left/right speakers SUR. L/R SP, LFE Bass out LFE/BASS OUT

Surround left/right speakers SUR. L/R SP

Choices: NONE, SML, LRG

1 SOUND MENU

A)SPEAKER SET

SUR. L/R SP

NONE >SML LRG

When the surround speakers are large

Select “LRG” (large).

When the surround speakers are small

Select “SML” (small).

When you do not use the surround speakers

Select “NONE” (none). This unit is set to the Virtual CINEMA DSP mode (see page 38).

LFE Bass out LFE/BASS OUT

Use this feature to select the speakers that output the LFE (low-frequency effect) and the low-frequency signals. Choices: SWFR, FRNT, BOTH

1 SOUND MENU

A)SPEAKER SET

LFE/BASS OUT

SWFR FRNT>BOTH

When a subwoofer is connected to this unit and you want to get natural bass sound

Select “SWFR” (subwoofer). The LFE signals as well as the low-frequency signals of other speakers set to “SML” (or “SMALL”) are directed to the subwoofer.

When a subwoofer is connected to this unit and you want to get rich bass sound

Select “BOTH” (both). The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to “SML” (or “SMALL”) are directed to the subwoofer. The low-frequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the “FRONT SP” setting (see page 50).

When you do not use a subwoofer

Select “FRNT” (front). The LFE signals, the low- frequency signals of the front left and right channels, and the low-frequency signals of other speakers set to “SML” (or “SMALL”) are all directed to the front left and right speakers regardless of the “FRONT SP” setting (see page 50).

SET MENU

Crossover CROSS OVER

Use this feature to select a crossover frequency of all the speakers set to “SML” (or “SMALL”) in “SPEAKER SET” (see pages 50). All frequencies below the selected frequency will be sent to the subwoofer or front speakers depending on the setting of “LFE/BASS OUT” in “SPEAKER SET” (see pages 50).

Choices: 40Hz, 60Hz, 80Hz, 90Hz, 100Hz, 110Hz, 120Hz, 160Hz, 200Hz

1 SOUND MENU

A)SPEAKER SET

CROSSOVER

FREQ;;;80Hz

Subwoofer phase SUBWOOFER PHASE

Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear.

Choices: NORMAL, REVERSE

1 SOUND MENU

A)SPEAKER SET

SUBWOOFER PHASE

>NORMAL REVERSE

•Select “NORMAL” if you do not want to reverse the phase of your subwoofer.

•Select “REVERSE” to reverse the phase of your subwoofer.

OPERATION ADVANCED

English

51 En