
Optimizing the speaker setting for your listening room (YPAO)
10Press 9ENTER to display the setup results in detail.
AUTO
.RESULT
SP : 3/4/0.1
DIST: 4.50/5.30m
LVL :
>SET CANCEL
[]/[
]:Up/Down [ENTER]:Detail
RESULT WIRING
FRONT L;;;;;;;OK
[[]/[[]:Select [ENTER]:Return
11Press 9l / h repeatedly to toggle between the setup result displays.
Press 9k / n to toggle between the parameters in a results.
Results of the speaker connection and wiring (WIRING)
Notes
•The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer.
•In the “EQ” results, different values may be set for the same frequency to provide finer adjustments.
12Press 9ENTER to return to the top result display.
AUTO
RESULT
SP : 3/4/0.1
DIST: 4.50/5.30m
LVL :
.>SET CANCEL
[]/[
]:Up/Down [ENTER]:Enter
13Make sure the pointer is pointing at “SET” and “CANCEL” and then press 9l / h to select “SET” or “CANCEL”.
AUTO
RESULT
SP : 3/4/0.1
DIST: 4.50/5.30m
LVL :
.>SET CANCEL
[]/[
]:Up/Down [ENTER]:Enter
Results of the speaker distance from the listening position (DISTANCE)
Results of the setting of each speaker size
(SIZE)
Results of the parametric equalizer of each speaker (EQ)
Results of the speaker output level (LEVEL)
y
If you are not satisfied with the results or want to manually adjust each parameter, use “MANUAL SETUP” (see page 63).
Choices: SET, CANCEL
•Select “SET” to confirm the “AUTO SETUP” results.
•Select “CANCEL” to cancel the “AUTO SETUP” results.
14Press 9ENTER to confirm your selection.
The following screen appears. Disconnect the optimizer microphone from this unit to exit from “SET MENU”. The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.
AUTO
AUTO
Disconnect Microphone
PRESS [ENTER] [MENU]:Exit
y
If you change speakers, speaker positions, or the layout of your listening environment, run “AUTO SETUP” again to recalibrate your system.