Customizing this unit (MANUAL SETUP)
■Video settings B)VIDEO SET
Note
Use “VIDEO” of “INIT” in “ADVANCED SETUP” to set the parameters in “VIDEO SET” to the factory presets (see page 96).
B)VIDEO SET
. VIDEO CONV.;;;;;;ON
[[ | p | Up/Down |
[p]/[[]: Select
Video conversion VIDEO CONV.
Use this feature to set whether to convert the video signals input at the VIDEO, S VIDEO, and COMPONENT VIDEO jacks.
Choice | Functions |
|
|
ON | Converts composite, |
| video signals interchangeably and |
| composite, |
| signals to HDMI video signals. |
|
|
OFF | Does not convert any signals. |
|
|
Notes
•This unit does not convert 480 line video signals and 576 line video signals interchangeably.
•The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are converted into the
•The converted video signals are only output at the MONITOR OUT jacks. When recording a video source, you must make the same type of video connections between each component.
•When composite video or
•Unconventional signals input at the composite video or
cases, set “VIDEO CONV.” to “OFF”.
■Memory guard C)MEMORY GUARD
Use this feature to prevent accidental changes to sound field program parameter and other system settings.
C)MEMORY GUARD
>OFF ON
[p]/[[]: Select
[ENTER]: Return
ChoiceFunctions
OFF | Turns off the “MEMORY GUARD” feature. |
ONProtects:
–sound field program parameters
–“AUTO SETUP” items
–all speaker levels
–“MANUAL SETUP” items
Notes
•You can change the following parameters even if “MEMORY GUARD” is set to “ON”:
–“EXTD SUR.” in “SOUND MENU” (see page 75)
–“DECODER MODE” in “INPUT MENU” (see page 77)
–“MEMORY GUARD”
•When “MEMORY GUARD” is set to “ON”, “ 
” appears at the top right of the “SET MENU” screen.
•You can change the settings of “SUR.” in the sound field program parameter screen (see page 61) even if “MEMORY GUARD” is set to “ON”.
