Yamaha DSP-AX763 owner manual 90 En, Programming macro operations

Remote control features

■ Programming macro operations
		Note
You can program your own macro and use the macro
		“AGAIN” appears in the display window (6) if you press a
programming feature to transmit several remote control
commands in sequence at the press of a button. Be sure to		button other than a macro button.
set up remote control codes or perform learning operations
	3 Press the buttons for the functions you want
before programming the macro.
		to include in the macro operation in
Notes		sequence.

•The default macro is not cleared when a new macro is programmed for a button. The default macro can be used again when the programmed macro is cleared.

•It is not possible to add a new signal (macro step) to the default macro. Programming a macro changes all macro contents.

•We do not recommend programming continuous operations such as volume control in a macro.

1Set the operation mode selector to FAMP or FSOURCE and then press CMACRO using

a ballpoint pen or similar object.

“MCR ?” appears in the display window (6) on the remote control.

AMP

SOURCE

TV

or	MACRO
AMP
SOURCE
TV

Note

If you do not complete each of the following steps within 30 seconds, the macro programming mode will be automatically canceled. In this case, start over from step 1.

You can set up to 10 steps (10 functions). After you have set 10 steps, “FULL” appears and the remote control automatically exits the macro mode. The following example is for programming the following procedure:

Step 1 (“MCR 1”): Press POWER.

Step 2 (“MCR 2”): Press DVD.

Step 3 (“MCR 3”): Press AUDIO.

MCR 1: POWER

POWER	POWER	STANDBY	POWER
TV	AV
	SCENE		1	LEVEL	PRESET/CH	SET MENU
1	2	3	4	TITLE		MENU AUDIO
				BAND		SRCH MODE
TUNER	A	B	C			PURE DIRECT 3
					ENTER
V-AUX/DOCK	DTV/CBL	CD	MD/CD-R			A/B/C/D/E
						STRAIGHT
DVD	DVR	VCR	PHONO	RETURN		DISPLAY
				MEMORY
	2			MCR 3: AUDIO
MCR 2: DVD

Indicates the number of macro steps entered

Flashes alternately so you can set the next step

2 Press the macro button you want to use to
		Note
operate the macro.		To change the selected control area, press 6SELECT k / n.
The macro button name (e.g. “M;DVD”) and the
		Pressing the input selector buttons will program a macro step,
selected component name (e.g. “DVD”) appear
		whereas 6SELECT k / nonly changes the selected control
alternately in the display window (6) on the remote		area.
control.
STANDBY POWER	4 Press CMACRO again using a ballpoint pen
		or similar object when the operation
		sequence you want to program is complete.

TUNER A B C

V-AUX/DOCK DTV/CBL CD MD/CD-R

Note

“ERROR” appears in the display window (6) if you press

DVD DVR VCR PHONO

more than one button simultaneously.

90 En