Remote control features
■Selecting a component to be controlled
You can select a component to be controlled independently of the input source selected with the input selector buttons.
Press 6SELECT k / n repeatedly to select the desired component.
The name of the component to be controlled appears in the display window (6) on the remote control.
SELECT
■Controlling optional components
(Option mode)
“OPTN” is an optional component control area that can be programmed with remote control functions independently from any input source. This area is useful for programming commands that are to be used only as a part of a macro function or for components that do not have a valid remote control code.
To select the option mode, press 6SELECT k / n repeatedly until “OPTN” appears in the display window (6) on the remote control.
SELECT
Setting remote control codes
You can control other components by setting the appropriate remote control codes. Codes can be set up for each control area. For a complete list of available remote control codes, refer to “List of remote control codes” at the end of this manual.
The following table shows the default component (Library: component category) and the remote control code for each control area.
Remote control code default settings
Control area | Component | Manufacturer | Default | |
category | code | |||
|
| |||
|
|
|
| |
TUNER | TUNER | Yamaha | 2602 | |
|
|
|
| |
A | TAPE | Yamaha | 2700 | |
|
|
|
| |
B | LD | Yamaha | 2200 | |
|
|
|
| |
C | TUNER | Yamaha | 2607 | |
|
|
|
| |
TUNER | Yamaha | 2606 | ||
DOCK | ||||
|
|
| ||
|
|
|
| |
DTV/CBL | TV | – | – | |
|
|
|
| |
CD | CD | Yamaha | 2300 | |
|
|
|
| |
Yamaha | 2400 | |||
|
|
|
| |
DVD | DVD | Yamaha | 2100 | |
|
|
|
| |
DVR | DVR | Yamaha | 2807 | |
|
|
|
| |
VCR | VCR | – | – | |
|
|
|
| |
PHONO | TV | – | – | |
|
|
|
|
Note
You cannot set a remote control code for the optional area. See page 86 to program buttons operated within this component control area.
Note
You may not be able to operate your Yamaha component even if a Yamaha remote control code is preset as listed above.
In this case, try setting another Yamaha remote control code.
1Set the operation mode selector to
FSOURCE and then press an input selector button (5) to select the control area you want to set up.
| TUNER | A | B | C |
AMP |
|
|
|
|
SOURCE | DTV/CBL | CD | ||
|
|
|
| |
TV | DVD | DVR | VCR | PHONO |
|
