
Customizing this unit (MANUAL SETUP)
2 VOLUME MENU
Use this menu to manually adjust the various volume settings.
2 VOLUME MENU
. ADAPTIVE DRC;;;;OFF ADAPTIVE DSP
LEVEL;;;;OFF MUTE TYPE;;;;;;FULL MAX VOL.;;;;+16.5dB INIT. VOL.;;;;;;OFF
[[ | p | Up/Down |
[p]/[[]: Select
Adaptive dynamic range control
ADAPTIVE DRC
Use this feature to adjust the dynamic range in conjunction with the volume level. This feature is useful when you are listening at lower volumes or at night. When “ADAPTIVE DRC” is set to “AUTO”, this unit controls the dynamic range as follows:
–If the VOLUME setting is low: the dynamic range is narrow
–If the VOLUME setting is high: the dynamic range is wide
level | AUTO | level |
| |
| AUTO | |||
Output |
| Output | ||
OFF | OFF | |||
|
|
Input level |
| Input level |
VOLUME: low | VOLUME: high | |
|
|
|
Choice |
| Functions |
|
| |
AUTO | Adjusts the dynamic range automatically. | |
|
| |
OFF | Does not adjust the dynamic range automatically. | |
|
|
|
y
•You can also adjust the dynamic range of the bitstream signal sources by using “DYNAMIC RANGE” in “SOUND MENU” (see page 74).
•This function is also useful for listening with your headphones.
Note
The adaptive dynamic range control feature does not function when this unit is in the Pure Direct mode (see page 51).
Adaptive DSP level ADAPTIVE DSP LEVEL
Use this feature to make fine adjustments of the DSP effect level (see page 57) automatically in conjunction with the volume level.
Choice | Functions |
|
|
AUTO | Adjusts the DSP effect level in conjunction with |
| the volume level. |
|
|
OFF | Does not adjust the DSP effect level |
| automatically. |
|
|
Note
Even if you set “ADAPTIVE DSP LEVEL” to “AUTO”, this unit does not change but the
Muting type MUTE TYPE
Use this feature to adjust how much the mute function reduces the output volume (see page 44).
Choice | Functions |
|
|
FULL | Mutes all the audio output. |
|
|
Reduces the current volume by 20 dB. | |
|
|
Maximum volume MAX VOL.
Use this feature to set the maximum volume level. This feature is useful to avoid the unexpected loud sound by mistake. For example, the original volume range is
5.0dB, the volume range becomes
Control range:
Control step: 5.0 dB
Notes
•When this unit is in the auto setup procedure, the volume level is automatically set to 0 dB regardless of the current “MAX VOL.” setting.
•The “MAX VOL.” setting takes priority over the initial volume setting. For example, if “INI.VOL.” is set to
Initial volume INIT. VOL.
Use this feature to set the volume level of this unit when the power of this unit is turned on.
Choices: OFF, MUTE,
Control step: 0.5 dB
Note
The “MAX VOL.” setting takes priority over the initial volume setting.