![](/images/new-backgrounds/1242567/242567179x1.webp)
Remote control features
3Press 9k / n to select and enter a character.
Pressing 9n changes the character as follows:
A to Z, 1 to 9, 0, + (plus), – (hyphen), ; (semicolon), / (slash), and space.
Pressing 9k changes the characters in reverse order.
PRESET/CH
ENTER
A/B/C/D/E
Macro programming features
The macro programming feature makes it possible to perform a series of operations with the press of a single button. For example, when you want to play a CD, normally you would turn on the components, select the CD input, and press the play button to start playback. The macro programming feature lets you perform all of these operations simply by pressing the CD macro button. The buttons listed as macro buttons below are factory set with macro programs. You can also program your own macros (see page 90).
4Press 9h to move the cursor to the next position.
PRESET/CH
ENTER
A/B/C/D/E
y
Press 9l to move the cursor to the previous position.
5Press 9ENTER to set the new name.
“OK” appears in the display window (6) on the remote control if renaming was successful. “NG” appears in the display window (6) on the remote control if renaming was unsuccessful. In this case, start over from step 3.
y
If you continuously want to rename another control area, press the input selector button (5), or press
6SELECT k / n repeatedly to select the component, then repeat steps 3 through 5.
6Press CRENAME again to exit the renaming mode.
RENAME
Note
“ERROR” appears in the display window (6) on the remote control if you press a button not indicated in the respective step, or when you press more than one button simultaneously.
■MACRO operations
Macro buttons
INFO | EON | MODE- PTY SEEK- START |
POWER | POWER | STANDBY | POWER |
TV | AV |
|
|
| SCENE | REC | |
|
| ||
1 | 2 | 3 | 4 |
OFF ON MACRO LEARN CLEAR RENAME
TUNER A B C
DVD DVR VCR PHONO
MACRO ON/OFF | MACRO |
1Set the CMACRO ON/OFF selector to ON.
OFF ON MACRO LEARN CLEAR
2Press the desired macro button.
3Set the CMACRO ON/OFF selector to OFF when you finish to using the macro programming operation.
OFF ON MACRO LEARN CLEAR
Notes
•While the remote control is running a macro program, it does not accept any other operation until it has completed running the program (the transmission indicator stops flashing).
•Continue to aim the remote control at the component the macro is operating until the macro operation is complete.