E

EJU00600a

To connect the jumper cables

1)Connect the positive (+) terminals of both batteries with the positive (red) jumper cable.

2)Connect one end of the negative (black) jumper cable to the negative

(–) terminal of the booster battery.

3)Connect the other end of the negative (black) cable to an unpainted bolt on the cylinder head.

cC

Do not connect the end of the jumper cable to the negative (–) terminal on the vehicle battery! Be sure all connections are secure and correct before attempting to start the engine. Any wrong connection may damage the electrical system.

4)Start the engine, then disconnect the cables by reversing the above steps.

cC

qe

w

Do not turn the starter motor for more than 5 seconds. The battely will be quickly discharged, which may be impossible to start the engine. Also, the starter motor may be damaged. If the engine does not start within 5 seconds, release the starter switch and try again after 15 seconds.

1Negative (black) jumper cable

2 Positive (red) jumper cable

3 Booster battery

GU0-125

5-5