E

q

GP7-020

q

GP7-021

q

GP7-022

EJU00350a

CHOKE KNOB

Pulling this knob supplies a rich fuel-air mixture required to start a cold engine.

NOTE:

Refer to “STARTING THE ENGINE” in the chapter 3 for proper operation.

1Choke knob

EJU00351

THROTTLE LEVER

Moving the throttle lever toward the han- dlebar increases engine speed. When the throttle lever is released, it returns to its closed (idle) position through the action of a return spring.

w

Before starting the engine, always check the operation of the throttle lever. It should move smoothly through its full range of operation, and should spring back to the idle position when released.

1Throttle lever

EJU00353a

STARTER SWITCH

To start the engine, push the starter switch (green button) .

NOTE:

8 The engine will not start when the lock plate is removed from the engine stop switch. The starter motor will not turn.

8 The engine will not start if the “LOCK” mode has been chosen. To set the mode to “START”, refer to the “PAD- LOC” function in the “MULTIFUNCTION METER” instructions.

1Starter switch

2-8