E

GU0-023

q

GP7-024

EJU00354a

COOLING WATER PILOT OUTLET

This watercraft is equipped with a cool- ingwater pilot outlets at left side of the hull. Check that water comes out of the outlets while the engine is running. If you do not see any water at the outlets, cooling water may not be circulating in the engine.

In that case, stop the engine and check for the cause (refer to overheat warning sys- tem).

NOTE:

If the cooling water passages are dry it will take about 20 seconds to reach water at the outlet after starting the engine.

EJU00356a

STEERING

Your water vehicle can be steered by turning the handlebars the same direction you wish to travel, to the right or left. When the handlebars are turned, the angle of the jet (output) nozzle at the stern is changed, and the change in direction of the nozzle changes the direction of the vehicle accordingly. Therefore, because only the strength of the jet-flow output can determine the speed and direction of a turn, the throttle must always be opened above idle when attempting a turn, except at trolling speed.

1Handlebars

2-9