E
NOTE:
8 If initial setting of the PADLOC has not been done, the “START” mode is automatically selected.
8 If you have previously chosen “LOCK” mode, the engine will not start unless the right code is put in to select “START” mode.
6)While lightly squeezing the throttle lever, push the starter switch (green button).
w
On this vehicle, the engine is connected directly to the drive unit. Starting the engine immediately generates some thrust. Only enough throttle should be applied to keep the engine at a fast enough idle to stay running.
7)As soon as the engine starts to run, release the starter button at once. The starter button returns to its home position automatically.
cC
8 Never push the starter switch while the engine is running.
8 Do not keep the starter motor running for more than five seconds. The battery will be quickly discharged, and it will be impossible to start the engine. The starter motor may also be damaged. If the engine does not start after five seconds of cranking, release the starter button. Wait at least 15 seconds before trying to start the engine again.