E
W A R N I N G
MODE
W A R N I N G
MODE
A/ SET
B
C
A/ SET
B
C
EJU00660a
Trip meter
A trip meter is provided for measuring the approximate traveled distance in miles. To show the trip meter, press the “MODE” button until the display shows “TRIP”. After showing “TRIP”, the display turns to “MILE”.
1)When the display shows “MILE”, press the “MODE” button for at least 2 seconds.
2)The buzzer will sound twice. The warning lamp (LED) and “MILE” blinks for 2 seconds, and “000” is dis- played. Now the meter will start to measure the distance you will travel.
3)When the trip meter begins measur- ing the traveled distance, the “.” to the left of “MILE” on the display will blink. When the watercraft is stopped, the “.” will no longer be dis- played.
NOTE:
Measured distance may vary depending on the water surface conditions, and wind direction. The measured distance should be used for a reference.
W A R N I N G
A/ SET
B
C
EJU00664a
Warning indicators 8 Fuel level
If the fuel remaining in the tank drops to about 12 L (3.2 US gal, 2.6 Imp gal), the fuel level segment, the fuel warning indi- cator, “FUEL” and the warning indicator lamp begin to blink. The buzzer also starts sounding.