E

q GP7-035

W A R N I N G

5 6 7 8

4

1000

r/min

3

2

MODE 1

0 mph

GP7-036

W A R N I N G

A/ SET

B

C

EJU00657a

PADLOC (Programmable digital locking ignition)

This feature is provided to deter unauthorized use. The function allows you to chose either “START” or “LOCK” mode, as the situation requires, much as you would use a main switch key in a motor vehicle.

If you have previously chosen “LOCK” mode, the engine will not start unless the right code is put in to select “START” mode.

NOTE:

If you do not use the PADLOC system, it is unnecessary to perform the initial setting of PADLOC. If so the “START” mode is automatically selected.

8 Initial setting

1)Disconnect the blue connector 1 behind the front storage compart- ment.

2)After the warning lamp (LED) lights, press the “MODE” button for at least 3 seconds until the display shows “COdE”. You are ready to set your code.

3)Select your 4-letter code by pressing the “A/SET”, “B” or “C” buttons in a desired sequence.

NOTE:

If you do not press a button for more than 10 seconds, the display automatically turns off. This cancels the process of setting of a code.

GP7-037

2-14