E

EJU00829

SUBMERGED WATER VEHICLE

If the water vehicle is submerged or flooded with water, follow the procedure below and consult your Yamaha water vehicle dealer as soon as possible. Failure to do so may result in serious engine damage !

1)Beach the vehicle and remove the drain plug(s) to drain the water from the engine compartment.

2)Set the fuel cock to “OFF”.

3)Remove the spark plugs and dry them with a cloth.

4)Without reinstalling the spark plugs, crank the engine until all the water in the cylinders has been drained.

5)Reinstall the drain plug(s) and the spark plugs.

6)Set the fuel cock to “ON”.

7)Launch the vehicle into the water again and run the engine for at least 10 minutes. If the engine will not start, repeat above steps.

8)Turn the engine off. Set the fuel cock to “OFF”.

9)Remove the cap(s) on the silencer cover and spray a rust inhibitor (such as Yamaha Stor-Rite Engine Fogging Oil) into the carburetor while cranking the engine.

10)Have your vehicle inspected by a Yamaha water vehicle dealer as soon as possible.

5-7