![](/images/backgrounds/82630/82630-11964x1.png)
E
8)After the engine is warm, push the choke knob in fully, to its original position.
NOTE:
If the choke knob is left pulled out, the engine will stall.
EJU00666a
STOPPING THE ENGINETo stop the engine, release the throttle lever, then push and hold the engine stop switch (red button) with your left hand. When the red button is pushed the ignition stops, which stops the engine.
If leaving the water vehicle, choose the “LOCK” mode on multifunction meter by setting PADLOC, and remove the engine stop switch lanyard to deter unauthorized use. To set the mode, refer to “PADLOC” of “MULTIFUNCTION METER”.