E
e q
w
3)Attach the lock plate to the engine stop lanyard switch. Also, attach the lanyard to your left wrist.
1Engine stop lanyard switch
2 Lanyard
3 Lock plate
w
Check that the lanyard is not frayed or broken, wrapped around the handlebars, or tangled in controls. If the operator falls off, the vehicle could continue to run and cause an accident.
The operator would also be unable to rebound the vehicle, which increases the chance of being hit by another boat and the risk of exposure.
NOTE:
It is not possible to start the engine with the lock plate removed from the engine stop lanyard switch.
4)Pull the choke knob all the way out to start a cold engine.
NOTE:
The choke should not be used when the engine is warm.
5)If the “LOCK” mode was chosen pre- viously, chose the “START” mode before starting the engine. To set the mode, refer to “PADLOC” in “MULTI-
FUNCTION METER”.