E

q w

 

GP7-025

A

 

B

 

C

 

D

D

 

C

 

B

GP7-026

A

 

D

C

N

B

A

GP7-027

EJU00360

QUICK SHIFT TRIM SYSTEM (Q.S.T.S.)

The trim angle of your water vehicle can be adjusted by operating the Q.S.T.S. Operating the trim shifting grip of the Q.S.T.S. changes the angle of the jet (out- put) nozzle at the rear of the craft. The nozzle angle changes the trim angle of the vehicle to one of five positions : two positions A and B for bow down, neutral “N”, and two positions C and D for bow up.

1Trim shifting grip

2Shift lock release lever

To change the trim angle of the vehicle

1)Set the throttle lever to half open (3000 r/min) or less.

2)Squeeze and hold the shift lock release lever. Then turn the trim shift- ing grip to the desired position.

8 Turning the grip to A or B from “N”:

Bow will go down while the vehicle is on plane.

8 Turning the grip to C or D from “N”:

Bow will go up while the vehicle is on plane.

3)Release the shift lock release lever to lock the position.

cC

Do not turn the grip while operating the vehicle at full throttle, otherwise damage could occur to the Q.S.T.S.

The Neutral (“N”) shift position will provide good performance for most condi- tions. To enhance particular types of per- formance, choose the one of the “Bow Down” or “Bow Up” positions.

2-10