E

GU0-102

q

GP7-104

EJU00553

GREASING POINTS

To keep moving parts sliding or rotating smoothly, coat them with water resistant

grease (Yamaha Marine Grease, YAMAHA grease A) or equivalent.

Throttle cable and choke cable

1)Grease the carburetor throttle cable and choke cable inner wires.

2)Pull the throttle lever and remove the seal. Spray a rust-inhibitor into the outer cable. Refit the seal securely.

1Seal

GU0-105

GP7-106

EJU00554

Oil pump cable

Grease the oil pump cable inner wire.

EJU00555

Steering cable ball joints and inner wire

1)Grease the steering cable ball joints both on the handlebar side and on the steering nozzle side.

2)Extend the steering cable inner wire, and apply a thin coat of grease to it both on the handlebar side and on the steering nozzle side.

4-16