E

W A R N I N G

A/ SET

B

C

GP7-038

W A R N I N G

W A R N I N G

MODE

MODE

GP7-041*

W A R N I N G

A/ SET

B

MODE

C

GP7-039*

W A R N I N G

A/ SET

B

C

4)After completing code setting, the buzzer will sound 3 times and the dis- play will show “SET”. Lastly, the dis- play turns off and the warning lamp (LED) turns on again. After the meter has displayed this sequence, recon- nect the blue connector.

NOTE:

8 Your own code is kept even if the battery terminal is disconnected.

8 If you forget your own code, or if you want to change the code, do this “Initial setting” procedure again from the beginning.

8 Selecting “START” or “LOCK” mode Selecting the desired mode can only be done after the “Initial setting” has been done and while the display is not lighting.

1)Press the “MODE” button until the meter displays the current mode, “START” or “LOCK”.

2)With “START” or “LOCK” displayed, press the “MODE” button continu- ously for about 3 seconds until the display changes to “COdE”.

3)Enter your 4-letter code by pressing the “A/SET”, “B” or “C” buttons in the right sequence.

NOTE:

If you do not press a button for more than 10 seconds, the display automatically turns off. This cancels the process of selecting the mode.

GP7-040

2-15