Recording Your Performances and Creating Songs — Song Creator
3 Press the MAIN [B] button to specify the section and enter the chord indicated at right.
MAIN A |
|
| BREAK | MAIN B |
MAIN |
|
|
|
|
C | F | G | F G7 | C |
C |
| 003:1:000 |
| |
|
|
| ||
Select this note value and play the chords indicated at right.
■Play back the newly created chord progression
Use the [C] (▲) button to move the cursor to the beginning of the song, and press the SONG [START/STOP] button to hear the newly entered notes. To actually enter the recorded data, press the [EXIT] button. The entered data can be edited from the SONG CREATOR (CHD) display (page 106). Finally, press the [F] (EXPAND) button from the SONG CREATOR (CHD) display in order to convert the input data into song data.
To enter a
[D]buttons.
END Mark
An “END” mark is shown in the display, indicating the end of the song data.
The actual position of the End mark differs depending on the section that is input at the end of the song. When an Ending section is input, the End mark automatically follows the Ending data. When a section other than Ending is input, the End mark is set two measures after the final section.
The End mark can be freely set to any position desired.
100