Adjust the Volume Balance and Changing Voices — Mixing Console
Changing the Tone of the Voice — Filter
The operations for this page apply to step 2 of the procedure on page 121.
|
| Switches between the HARMONIC and BRIGHTNESS parameters. |
DIGITAL |
|
|
STUDIO |
|
|
SOUND CREATOR |
|
|
DIGITAL RECORDING | A | F |
|
| |
| B | G |
MIXING CONSOLE | C | H |
| ||
PART | D | I |
| E | J |
Each press of this button switches among the various parts/ channels.
For details about the Filter, see page 89.
n
Be careful with these con- trols. Depending on the selected voice, extreme settings may result in noise or distortion.
|
|
|
|
|
|
| HARMONIC ........ | Allows you to adjust the resonance effect |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | (see “Harmonic Content” on page 89). |
|
BRIGHTNESS .... Determines the brightness of the sound by
adjusting the cutoff frequency (page 89).
Changing
The operations for this page apply to step 2 of the procedure on page 121.
Switches among the available parameters: PORTAMENTO
TIME, PITCH BEND RANGE, OCTAVE, and TUNING.
A | F |
B | G |
C | H |
D | I |
E | J |
Portamento is used to create a smooth transition in pitch from one note to the next.
Refer to the explanation below.
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
These increase/decrease (transpose) the pitch in semitone units.
MASTER ...Transposes both the pitch of the keyboard and that of the song playback.
SONG | ........Transposes the pitch of the song playback. |
KBD .......... | Transposes the pitch of the keyboard. |
PORTAMENTO TIME ............ | When the part is set to Mono (page 58, 88), this determines the Portamento time. The |
| higher the value, the longer the time it takes for the pitch to change. Portamento is only |
| applied when you play legato (playing the next note before releasing the previous one). |
PITCH BEND RANGE ........... | Determines the range of the PITCH BEND wheel for the corresponding part. The range is |
| from “0” to ”12” with each step corresponding to one semitone. |
OCTAVE................................ | Determines the range of the pitch change in octaves, over two octaves up or down. The |
| value of this parameter is added to the value set via the [UPPER OCTAVE] button. |
TUNING............................... | Determines the pitch of the instrument. |