Creating Accompaniment Styles — Style Creator

Realtime Recording — Basic

You can use the Realtime Recording features to create your own accompaniment style — either from scratch or based on the preset accompaniment data. The operations here apply to step 4 on page 109.

1

Select the desired channel for recording by simultaneously holding down the [F] (REC CH) button and

pressing the appropriate [1▲▼] - [8▲▼] button.

Before recording to one of the non-rhythm channels (BASS - PHR 2), make sure to delete the existing data of the appropriate channel. You can make other settings (see the box “Other Parameters in the BASIC page” on page 111) after closing the REC CHANNEL display by pressing the [EXIT] button. To call up the REC CHANNEL display again, press the [F] (REC CH) button.

Calls up the display for changing the tempo or beat (time signature).

Selects an empty style,

allowing you to create a

A

 

new style from scratch.

B

 

C

 

D

 

E

Available only when the channel is set to [RHY1] or [RHY2], this lets you delete specific percussion sounds during recording. Simultaneously hold down this button and press the key corresponding to the instrument you want to delete.

When this button is pressed, “DELETE” will appear over channels containing data. To delete data from a specific channel, simultaneously hold down this button and press the appropriate [1▲] - [8▲] button. To release or cancel the

 

selection, press the [1▼] -

 

[8▼] button corresponding

 

to the channel you wish to

 

cancel. As long as you

F

continue to hold down the

 

[J] button, you can toggle

G

between deleting and

 

Hrestoring the selected data.

Releasing the [J] button

I

permanently deletes the

J

data. Before recording to

one of the non-rhythm

 

 

channels (BASS - PHR 2),

 

make sure to delete the

 

existing data of the

 

appropriate channel.

REC .... Channel is enabled for recording.

ON ...... Channel is enabled for playback.

OFF .... Channel is muted.

2

Start recording by pressing the STYLE [START/STOP] button.

The selected section of the style starts playing back. Since the rhythm pattern

loops repeatedly, you can record new sounds and notes on each pass while listening to the pattern. Icons above the keys conveniently indicate the percussion instruments assigned to the keys.

If you’ve enabled Sync Start (by pressing the SYNC. START button), you can start recording by simply pressing a key on the key- board.

3

END

Stop recording by pressing the STYLE [START/STOP] button again.

With the REC CHANNEL display shown, close the display by pressing the [EXIT] button.

•Only Drum Kit/SFX Kit can be selected for the RHY 2 channel.

•For the non-rhythm chan- nels (BASS - PHR 2), all- voices with the exception of the Organ Fultes voice/ Drum Kit/SFX Kit can be selected.

110PSR-2000/1000