Using Your PSR-2000/1000 with Other Devices

CAUTION

Before connecting the PSR-2000/1000 to other electronic compo- nents, turn off the power to all the components. Before turning the power on or off to all components, set all volume levels to minimum

(0). Otherwise, electrical shock or damage to the components may occur.

1

1Using the Headphones (PHONES jack).

A standard pair of stereo headphones can be plugged in here for private practice or late-night playing. The internal stereo speaker system is automatically shut off when a pair of headphones is plugged into the PHONES jack (page 149).

2Connecting the Microphone or Guitar (MIC./LINE IN jack) (PSR-2000 only).

By connecting a microphone to the PSR-2000, you can enjoy singing along with your own performance or song playback. (A dynamic microphone is recommended.) The PSR-2000 outputs your vocals or guitar sounds through the built-in speakers.

1

Connect your microphone to the MIC./LINE IN jack

(standard 1/4" phone jack).

 

 

 

 

 

 

 

 

Use an unidirectional microphone for best results.

2

Set the [MIC. LINE] switch (located next to the

[MIC./LINE IN] jack) to the MIC. position.

 

MIC. LINE

MIC. LINE

When connecting a microphone

When connecting a guitar

You should set the [MIC. LINE] switch to the LINE position when connecting an audio source with line-level output to the MIC./LINE IN jack.

3

Use the [INPUT VOLUME]

 

knob (located next to the

 

 

MIC./LINE IN jack) to set the

 

 

microphone volume then

 

 

trying singing into the

 

 

microphone.

 

 

The volume should be set high enough that the

 

SIGNAL lamp on the top panel lights steadily when

 

you sing, but not so high that the OVER lamp lights

 

(page 128).

 

 

P.152

P.153

23

MIC. LINE

INPUT

MIC./

R

L

R

L/L+R

DC IN 16V

 

VOLUME

LINE IN

AUX OUT

 

OUTPUT

 

(LEVEL FIXED)

P.154

P.153

P.153

6

5

4

TO HOST

Mac PC1 PC2 MIDI

IN

OUT

2

 

HOST SELECT

 

MIDI

FOOT PEDAL

152PSR-2000/1000