1 Speaker placement 2 3 4 5 6 7 8 9 10

3.1-channel system

1 2

9 3

2.1-channel system

1 2

9

■Setting the speaker impedance

(U.S.A. and Canada models only)

Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the speaker impedance to “6 Ω MIN”. In this case, you can also use 4-ohm speakers as the front speakers.

1Before connecting speakers, connect the power cable to an AC wall outlet.

2While holding down STRAIGHT on the front panel, press z(power).

z(power)

STRAIGHT

3Check that “SP IMP.” is displayed on the front display.

SPIMP.8MIN

4Press STRAIGHT to select “6 Ω MIN”.

5Press z(power) to set the unit to standby mode and remove the power cable from the AC wall outlet.

You are now ready to connect the speakers.

PREPARATIONS ➤ Placing speakers

En 14