Yamaha Speaker, ■Configuration

Speaker

Configures the speaker settings manually.

S e t u p
S p e a k e r	C o n f i g u r a t i o n
H D M I	D i s t a n c e
S o u n d	L e v e l
E C O	E q u a l i z e r
F u n c t i o n	T e s t T o n e
N e t w o r k
L a n g u a g e

■Configuration

Configures the output characteristics of the speakers.

•When you configure the speaker size, select “Large” if the woofer diameter of your speaker is 16 cm (6-1/4”) or larger or “Small” if it is smaller than 16 cm (6-1/4”).

❑Power Amp Assign

(RX-V575 only)

Selects a speaker system.

In addition to the 5.1- or 7.1-channel speaker system, various speaker configurations are possible using the Zone B speakers or bi-amp connection.

❑Subwoofer

Selects whether or not a subwoofer is connected.

Settings

	Select this option when a subwoofer is connected.
Use (default)	The subwoofer will produce LFE (low-frequency effect) channel audio
	and low-frequency components from other channels.
	Select this option when no subwoofer is connected.
None	The front speakers will produce LFE (low-frequency effect) channel
	audio and low-frequency components from other channels.

❑Front

Selects the size of the front speakers.

Settings

	Select this option for small speakers.
Small (default)	The subwoofer will produce front channel low-frequency components
	(configurable in “Crossover”).
	Select this option for large speakers.
Large	The front speakers will produce all of the front channel frequency
	components.

• “Front” is automatically set to “Large” when “Subwoofer” is set to “None”.

❑Center

Settings

Basic (default)

Select this option when you use a normal speaker system (not using Zone B speakers or a bi-amp connection).

Selects whether or not a center speaker is connected and its size.

Settings

Select this option for small speakers.

BI-AMP

Select this option when you connect front speakers that support bi-amp connections (p.16).

Small (default)	The subwoofer or front speakers will produce center channel
	low-frequency components (configurable in “Crossover”).

Zone B

Select this option when you use Zone B speakers (p.61) in addition to the speaker system in the main zone (Zone A).

	Select this option for large speakers.
Large	The center speaker will produce all of the center channel frequency
	components.
None	Select this option when no center speaker is connected.
	The front speakers will produce center channel audio.

CONFIGURATIONS ➤ Configuring various functions (Setup menu) En 71