Yamaha Controlling external devices with the remote control, ■TV operations, Registering the remote control code for a TV

CODE SET	CODE SET
SOURCE RECEIVER	SOURCE/RECEIVER

Controlling external devices with the remote control

HDMI

1

2

3

4

MHL

1

2

3

5

AV

4

5

6

A

USB

B

V-AUX

NET

ZONE

AUDIO

TUNER

FM

AM

PRESET

TUNING

MEMORY

INFO

.

STRAIGHT

MOVIE

MUSIC

SUR

DECODE

ENHANCER

DIRECT

SLEEP

You can use the unit’s remote control to operate external devices (such as BD/DVD players) if you have registered the remote control code of the external device.

•You cannot control an external device that does not have a remote control sensor.

•Ensure that the remote control ID of the external device is set to “ID1”. If any other ID is selected, the remote control operations may not work properly.

•If the unit’s remote control is without batteries for more than 2 minutes, the registered codes may be cleared. If this happens, insert new batteries and register the codes again.

3Press TV z.

4Use the numeric keys to enter the 4-digit remote control code.

Once the remote control code is successfully registered, SOURCE/RECEIVER blinks twice.

If it blinks six times, registration has failed. Repeat from Step 2.

	SCENE
BD	TV	NET	RADIO
DVD
SETUP		OPTION
	ENTER		VOLUME
RETURN		DISPLAY
TOP		POP-UP	MUTE
MENU		MENU
MODE
1	2	3	4
5	6	7	8	Numeric keys
9	0	10	ENT
		TV		TV operation keys
INPUT
	TV VOL	TV CH		TV z
MUTE

•Under the unit’s default settings, the amplifier code (Yamaha: 5098) is set for all the input selection keys. With this setting, you can control HDMI Control-compatible devices connected to the unit with the remote control. (This function may not work depending on the specification of the external device.)

Registering the remote control code for a TV

You can use the unit’s remote control to operate a TV if you have registered its remote control code.

•You can also register your TV’s remote control code to the unit’s input selection keys (p.86). This would allow you to use the cursor keys or numeric keys to operate the TV (this function may not be available on some TV models).

■TV operations

Once you have registered the remote control code for your TV, you can control it using the TV operation keys, regardless of the input source selected on the unit.

	INPUT	Switches the video inputs of the TV.
	MUTE	Mutes the audio output of the TV.
TV operation keys TV VOL		Adjust the volume of the TV.
	TV CH	Switch the channels of the TV
	TV z	Turns on/off the TV.

1Use “Remote Control Code Search” in the CD-ROM to find your TV’s remote control code.

•If there are multiple remote control codes, register the first code in the list. If that does not work, try the other codes.

2Press CODE SET using a pointed object such as the tip of a ballpoint pen.

SOURCE/RECEIVER blinks twice.

Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 2.

CONFIGURATIONS ➤ Controlling external devices with the remote control En 85