Playing back iPod music

You can play back iPod music on the unit using a USB cable supplied with the iPod.

•An iPod may not be detected by the unit or some features may not be compatible, depending on the model or software version of the iPod.

•To play back iPod videos on the unit, an Apple Composite AV Cable (not supplied) is required. Connect the USB and composite video plugs of the Apple Composite AV cable to the USB jack and VIDEO AUX (VIDEO) jack of the unit, and connect your TV and the unit with a video pin cable (p.22). To select a video, operate the iPod itself in the simple play mode (p.49).

Supported iPod (as of December 2012)

•iPod touch (1st, 2nd, 3rd and 4th generation)

•iPod nano (2nd, 3rd, 4th, 5th and 6th generation)

•iPhone 4S, iPhone 4, iPhone 3GS, iPhone 3G, iPhone

•iPad (3rd generation), iPad 2, iPad

Connecting an iPod

Connect your iPod to the unit with the USB cable supplied with the iPod.

1Connect the USB cable to the iPod.

2Connect the USB cable to the USB jack.

The unit (front)

RADIO

VIDEO AUX

STRAIGHT

AUDIOVIDEO5V2.1A

USB

Connected

VOL.

SW

C

L R

SLSR

•The iPod charges while it is connected to the unit. If you set the unit to standby mode while the iPod is charging, the iPod continues to charge up to 4 hours.

If “Network Standby” (p.81) in the “Setup” menu is set to “On”, it continues to change without limit.

•Disconnect the iPod from the USB jack when it is not in use.

PLAYBACK ➤ Playing back iPod music

En 47