Changing the FM/AM tuning frequency setting (TU)

 

Updating the firmware (UPDATE)

(Asia and General models only)

 

 

TUFM50/AM9

Change the FM/AM tuning frequency setting of the unit depending on your country or

UPDATEUSB

New firmware that provides additional features or product improvements will be released as needed. Updates can be downloaded from our website. If the unit is

region.

Settings

FM100/AM10

Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps.

connected to the Internet, you can download the firmware via the network. For details, refer to the information supplied with updates.

■Firmware update procedure

Do not perform this procedure unless firmware update is necessary. Also, make sure

FM50/AM9 (default)

Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps.

you read the information supplied with updates before updating the firmware.

Switching the video signal type (TV FORMAT)

TVFORMATNTSC

Switch the video signal type of HDMI output so that it matches to the format of your TV.

Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly.

Settings

NTSC, PAL

Default

U.S.A., Canada, Korea and General models: NTSC

Other models: PAL

Restoring the default settings (INIT)

INITCANCEL

1Press STRAIGHT repeatedly to select “USB” or “NETWORK” and press INFO to start firmware update.

Choices

USB

Update the firmware using a USB memory device.

 

 

NETWORK

Update the firmware via the network.

 

 

•If the unit detects newer firmware over the network, the envelope icon (p) will appear in the “Network Update” screen. In this case, you can also update the unit’s firmware by following the procedure in “Updating the unit’s firmware” (p.88).

Checking the firmware version (VERSION)

VERSIONxx.xx

Check the version of firmware currently installed on the unit.

•You can also check the firmware version in “Network Update” (p.82) in the “Setup” menu.

•It may take a while until the firmware version is displayed.

Restores the default settings for the unit.

Choices

ALL

Restores the default settings for the unit.

CANCEL

Does not perform an initialization.

 

 

CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)

En 84