Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L
Setting range
0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments
Default
Front L, Front R, Subwoofer: 3.00 m (10.0 ft)
Center: 2.60 m (8.6 ft)
Others: 2.40 m (8.0 ft)
■LevelAdjusts the volume of each speaker.
Choices
Front L, Front R, Center, Surround L, Surround R, Surround Back L
Setting range
Default
Front L, Front R, Subwoofer: 0.0 dB
Others:
Adjusts the tone with an equalizer.
❑EQ Select
• “PEQ” is available only when the YPAO has been performed (p.31).
■Manual equalizer adjustment
1Set “EQ Select” to “GEQ”.
2Use the cursor keys (q/w) to select “Channel” and the cursor keys (e/r) to select the desired speaker channel.
3Use the cursor keys (q/w) to select the desired band (frequency) and the cursor keys (e/r) to adjust the gain.
Setting range
E q u a l i z e r
E Q S e l e c t | G E Q | |
G E Q E d i t | F r o n t L | |
C h a n n e l | ||
| 6 3 H z |
|
1 | 6 0 H z |
|
4 | 0 0 H z |
|
| 1 k H z |
|
2 . 5 k H z |
| |
6 . 3 k H z
1 6 k H z
B a c k : R E T U R N
4To exit from the menu, press SETUP.
■Test ToneEnables/disables the test tone output. Test tone output helps you to adjust the speaker balance or equalizer while confirming its effect.
Settings
Off (default) | Does not output test tones. |
Selects the type of equalizer to be used.
Settings
On
Outputs test tones automatically when you adjust the speaker balance or equalizer.
PEQ
Applies the parametric equalizer values obtained by the YPAO measurement (p.31).
GEQ (default)
Select this option when you want to adjust the equalizer manually. For details, see “Manual equalizer adjustment”.
Off | Does not use the equalizer. |
CONFIGURATIONS ➤ Configuring various functions (Setup menu) | En 73 |
|
|