■MAC Address Filter

Sets the MAC address filter to limit access to the unit from other network devices.

❑Filter

Enables/disables the MAC address filter.

Settings

■Network Standby

Selects whether the unit can be turned on from other network devices (network standby).

Settings

Off (default)

Disables the network standby function.

Off (default)

Disables the MAC address filter.

Enables the MAC address filter. In “MAC Address 1–10”, specify the

On

Enables the network standby function.

(The unit consumes more power than when “Off” is selected.)

OnMAC addresses of the network devices that will be permitted access to the unit.

❑MAC Address 1–10

Specifies the MAC addresses (up to 10) of the network devices that will be permitted access to the unit when “Filter” is set to “On”.

■Procedure

1Use the cursor keys (q/w) to select an MAC address number (1 to 10).

2Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

3To exit from the menu, press SETUP.

■DMC Control

Selects whether to allow DLNA-compatible Digital Media Controller (DMC) to control playback.

Settings

Disable

Does not allow DMCs to control playback.

Enable (default)

Allows DMCs to control playback.

 

 

•A Digital Media Controller (DMC) is a device that can control other network devices through the network. When this function is enabled, you can control playback of the unit from DMCs (such as Windows Media Player 12) on the same network.

■Network Name

Edits the network name (the unit’s name on the network) displayed on other network devices.

■Procedure

1Press ENTER to enter the name edit screen.

2Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a character.

N e t w o r k N a m e

Y a m a h a x x x x x x

B a c k : R E T U R N

3To confirm the new name, press ENTER.

4To exit from the menu, press SETUP.

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 81