FDVD player/VCR control buttons
Control your DVD player or VCR (see pages 95 and 97).
GMy Beam microphone
Collects the test tones from this unit when using the My Beam
HTV POWER
Turns on or off the power of your TV (see page 95).
IAV POWER
Turns on or off the power of the selected component (see pages 95 and 97).
JINPUT1
Switches the input source on your TV (see page 95).
KMACRO
Use to set the TV macro (see page 98).
La /5
Switches the preset station number (1 to 8) when this unit is receiving an FM broadcast or XM channel (see
page 46).
MCAT
Switches the preset station group (A to E) when this unit is receiving an FM broadcast or XM channel (see page 46).
NSLEEP
Sets the sleep timer (see page 70).
OINPUTMODE
Toggles between input modes (AUTO, DTS, and ANALOG) (see page 90).
PBeam mode buttons
Change the beam mode settings (see pages 56, 62, and 63).
QSUR. DECODE
Selects the surround mode for playback (see page 59).
RMENU
Displays the setup menu on your TV monitor (see pages 31 and 75).
SOperation mode selector
Selects the operation mode of this unit. Select YSP when operating this unit and select TV/AV when operating your TV or other AV components.
Controls and functions
TRETURN
Returns to the previous SET MENU screen.
UTV VOL +/–
Adjusts the volume level of your TV (see page 95).
VCH +/–
Changes the channels of your TV, digital satellite tuner, cable TV tuner, or VCR (see pages 95 to 97).
WTV MUTE, CODE SET
Mutes the audio output of your TV (see page 95). Sets up remote control codes (see page 94).
Note
The functions L and M are available only when the FM/XM stations are preset.
INTRODUCTION
English
