Yamaha YSP-3050 Using this manual, 5 En, Notes, 1Install this unit in your listening room

Using this manual

Notes

•This manual describes how to connect and operate this unit. For details regarding the operation of external components, refer to the supplied owner’s manual for each component.

•Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.

•y indicates a tip for your operation.

•This manual is printed prior to production. Designs and specifications are subject to change in part as a result of improvements, etc. In case of differences between the manual and the product, the product has priority.

1Install this unit in your listening room.

See “Installation” on page 13.

2Connect this unit to your TV and other external components.

See “Connections” on page 16.

3Prepare the remote control and turn on the power of this unit.

See “Getting started” on page 24.

4Run AUTO SETUP.

See “AUTO SETUP (IntelliBeam)” on page 29.

5Play back a source.

See “Playback” on page 39.

6Change the beam modes and/or CINEMA DSP settings.

See “Enjoying surround sound” on page 56.

If you want to make additional settings and adjustments

7Run MANUAL SETUP to fine-tune settings and/or set remote control codes.

See “MANUAL SETUP” on page 74 and “Remote control features” on page 94.

INTRODUCTION

English

5 En