Yamaha YSP-3050 Adjusting surround mode parameters, 61 En, When DTS Neo:6 Music is selected

Adjusting surround mode parameters

You can configure the parameters for Dolby Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect.

MUSIC MOVIE SPORTS

7	8	9
OFF		SUR. DECODE
0	+10
ENHANCER	ENTRY	MENU
CAT/	ENTER	TV/AV
A-E		YSP

DISPLAYRETURN

1Repeat steps 1 and 2 in “Enjoying 2-channel sources in surround sound” on page 59 and select PL II Music or Neo:6 Music.

2Press / to select the parameter.

ENTER

3Press / to configure the selected parameter.

ENTER

Enjoying surround sound

■When Dolby Pro Logic II Music is selected

PANORAMA

Gives the front left and right channel sound a wraparound effect, distributed throughout the entire surround sound field to give you an expansive feeling. Choices: ON/OFF

Default setting: OFF

DIMENSION

Adjusts the difference in volume between the front and surround channels to the desired volume balance. Control range: –3 (toward the surround direction) to +3 (toward the front direction)

Default setting: STD (standard)

C. WIDTH

Distributes the center channel sound to the left and right. If 0 is selected, the center channel sound is output only from the center channel.

Control range: 0 to 7

Default setting: 3

■ When DTS Neo:6 Music is selected

C. IMAGE
Adjusts the center image from three channels (front
left and right and center) to varying degrees.
Control range: 0.0 (wider) to 1.0 (toward the center)	BASIC OPERATION
Default setting: 0.3

English

61 En