Before connecting components
■Cables used for connections
Audio/Video
AHDMI cable
Audio |
|
Audio pin cable (supplied) |
|
(White) | (White) |
(Red) | (Red) |
Optical cable (supplied)
Digital audio pin cable (supplied)
(Orange) 
(Orange)
3.5 mm stereo mini plug cable
5Subwoofer pin cable
Video
OSD video pin cable (supplied)/ Video pin cable
(Yellow) | (Yellow) |
Component video pin cable
(Green) | (Green) |
(Blue) | (Blue) |
(Red) | (Red) |
■Notes on connecting the optical cable
•Pull out the cap before connecting the optical cable.
When you are not using the optical cable, be sure to put the cap back in place.
•When inserting the cable into the optical digital jack, make sure the direction is correct.
Connections
■Affixing cables
To prevent cables from becoming unplugged, place the supplied cable clamp with the open side facing upward, attach it to the rear panel of this unit in a suitable position, and then affix cables in the cable clamp.
Optical cable
Attach to this unit
■Information on HDMI™
Audio signals
Input source | Audio signal type | |
|
| |
DVD video | Dolby Digital, DTS, PCM | |
|
| |
DVD audio | ||
(up to 96 kHz/24 bit) | ||
| ||
|
| |
Dolby Digital, DTS, PCM | ||
HD DVD | ||
| ||
|
|
Notes
•When CPPM
•This unit is not compatible with
y
•We recommend that you use an HDMI cable shorter than 5 m (16 ft) with the HDMI logo printed on it.
•Use a conversion cable (HDMI jack ↔
■Priority order for audio input signals
When multiple types of audio signals are simultaneously being input from a single source component, this unit
plays back the audio signals in the following priority order: HDMI → Digital → Analog
As default settings, the following input jacks are assigned to the corresponding input sources:
Input |
|
|
| |
jack | HDMI | Digital | Analog | |
Input | ||||
|
|
| ||
source |
|
|
| |
TV/STB | ✔ | ✔ | ✔ | |
|
|
|
| |
DVD | ✔ | ✔ |
| |
|
|
|
| |
AUX 1 |
| ✔ | ✔ | |
|
|
|
| |
AUX 2 |
| ✔ |
| |
|
|
|
| |
AUX 3 |
|
| ✔ | |
|
|
|
|
PREPARATION
| Note |
| This unit is compatible with |
Cap |
English
