Connections
Case 3: Connecting other connection methods
If your component supports optical digital connections, connect the optical digital output jack on your component (e.g., DVD player/recorder) to the AUX 1 OPTICAL DIGITAL INPUT jack on this unit. If your component does not support optical digital connections, connect the coaxial digital output jack on your component to the AUX 2 COAXIAL DIGITAL INPUT jack on this unit.
If your component does not support any digital connections, connect the analog audio output jacks on your component (e.g., VCR) to the AUX 1 AUDIO INPUT jacks on this unit.
y
To prevent the optical cable from being unplugged, affix the optical cable in the supplied cable clamp (see page 17).
Note
If you make analog and digital audio connections at the same time as shown in the illustration below, the digital audio signals input at the AUX 1 OPTICAL DIGITAL INPUT jack take priority over the analog audio signals input at the AUX 1 AUDIO INPUT jacks.
Rear panel of this unit
AUDIO INPUT | OUT | VIDEO INPUT | DIGITAL INPUT | |||
|
| VIDEO | COMPONENT | AUX 2 | DVD | |
|
|
|
|
|
| COAXIAL |
|
|
|
|
|
| OPTICAL |
AUX 1 | TV/STB | SUBWOOFER | STB | DVD | AUX 1 | TV/STB |
| 1 |
|
|
| 3 | 2 |
R | L |
|
|
|
| Analog audio | Coaxial | Optical | Video |
| output | digital | digital | input |
|
| output | output |
|
Video signal to the TV
DVD player/recorder, VCR,
game console, CD player, etc.
TV
Video |
| Audio |
OSD video pin cable |
| Audio pin cable |
|
| Optical cable |
|
| Digital audio pin cable |
