Yamaha YSP-3050 owner manual Using the audio output being played back, 88 En, your adjustments

Adjusting the audio balance

5 Press TEST when you have completed all	1 Set the operation mode selector to YSP.
your adjustments.
	TV/AV
TEST	YSP

Notes

•All channel levels cannot be adjusted when the 2-channel or 5- channel stereo playback (see page 62), My Beam (see page 63), or My Surround (see page 57) is selected as the beam mode.

•“FRONT L/R” cannot be adjusted when Stereo plus 3 Beam is selected as the beam mode (see page 57).

•“FRONT L/R” are automatically adjusted depending on the settings of the other channels when Stereo plus 3 Beam or stereo playback is selected as the beam mode (see pages 57 and 62).

y

If the level of a particular channel cannot be adjusted, “– –dB” appears in the front panel display.

2Press CH LEVEL repeatedly (or press

CH LEVEL and / ) to select the channel you want to adjust.

The front panel display changes as follows.

CH LEVEL

or

CH LEVEL

ENTER

Using the audio output being played back

You can also manually adjust the channel levels while playing back an input source such as a DVD.

ENHANCER ENTRY MENU

CAT/	TV/AV
	ENTER
A-E
	YSP

DISPLAYRETURN

VOLUME	CH	TV VOL
MUTE	TV INPUT	TV MUTE
CH LEVEL	TEST	CODE SET

FRONT L +1.0dB

CENTER -2.5dB

FRONT R +1.0dB

SUR.R +2.0dB

SUR.L +2.0dB

SWFR --dB

Note

“SWFR” is available only when a subwoofer is connected to this unit and SUBWOOFER is selected for BASS OUT in SOUND MENU (see page 80).

88 En