Continuous roll form paper, fanfold media, or cardstock with optional perforations and registration holes may be used. The standard 160S Printer and 105Se Printer with an optional reflective sensor can use “black-mark media” (media having a black mark printed on the liner side for use in positioning the labels).

Since print quality is affected by media and ribbon, printing speeds, and printer operating modes, it is very important to run tests for your applications . This is especially true if you’re operating in Peel-Off mode, where these variables combine with label size, backing content, diecut depth, and even humidity to affect printer operation.

Warnings and Precautions

Installation

CAUTION: To ensure that the Zebra S-Series Printer has proper cool- ing, do not place any padding or cushioning material on the back of, or underneath, the unit.

230 VAC Operation

CAUTION: Refer to “Installation” for instructions on configuring your printer for 230 VAC operation before connecting to a 230 VAC power source.

Use of Shielded Cable

CAUTION: Refer to the “Interconnections” Section.

Zebra printers comply with FCC “Rules and Regulations”, Part 15, Subpart J, for Class A Equipment, using fully shielded data cables. Use of unshielded cables may increase radiated emissions above the Class A limits and is not recommended.

Zebra printers comply with international regulations governing radiated emissions when using fully shielded data cables. Use of unshielded cables may increase radiated emissions above the regulated limits.

1-4

Zebra S-Series User’s Guide