Optional Printer Fonts

The S-Series Printer can be optioned with character fonts in addition to those which are standard in the unit.

Only one additional font can be installed in the printer at a time. This installation should be performed by a service technician. Once in- stalled, this font can be used in addition to the standard fonts available in the printer. Refer to the ZPL II Programming Guide for further application information.

Once an optional font is installed in the printer, the Configuration printout from the CANCEL Key Self Test will indicate the font type.

The following optional scalable smooth fonts are presently available (each is supplied as a complete set of standard, bold, italic, and bold italic styles): CG Triumvirate™, CG Times™, CG Palacio™, Futura™, Univers®.

The following Bitmap Smooth Fonts (supplied in bold style only) are presently available:

CG Triumvirate™ Bold, CG Triumvirate™ Bold Condensed, Futura™ Bold, Univers® Bold, CG Times™Bold and CG Palacio™ Bold (type sizes of 6 pt, 8 pt, 10 pt, 12 pt, 14 pt, 18 pt, 24 pt, 30 pt, 36 pt are avail- able.)

Examples of these optional fonts can be found in “Appendix D.”

230 VAC Factory Setup

Your Zebra S-Series Printer will be factory set for 230 VAC operation if requested when the order is placed. If it is necessary to reconfigure

your printer for operation at 115 VAC, see “Installation.”

Zebra S-Series User’s Guide

9-3