Ribbons and Printhead Wear

CAUTION: Ribbons used in the Zebra Technologies Corporation Printer MUST be as wide as or wider than the media. Zebra-brand ribbons provide an extremely smooth backing surface that protects the printhead from abrasion by the media. If the ribbon is narrower than the media, areas of the printhead will be unprotected and subject to premature wear.

Repacking

CAUTION: If shipment of your printer is necessary, carefully pack the printer in a suitable container to avoid damage during transit. Whenever possible, use the original container from the factory. If the original container is not available, an optional packing kit can be purchased from Zebra. When using a different container, a procedure similar to the original factory packaging should be followed.

Refer to “Installation” for further repacking instructions.

Zebra S-Series User’s Guide

1-5