Zebra Technologies 105Se, 160S Removing Used Ribbon (105Se)

Figure 2.8 Fanfold Media Loading Diagrams (160S)

Removing Used Ribbon (105Se)

To remove used ribbon, refer to Figure 2.9 and follow the steps below.

1.Pull the hook out slightly, then rotate the hook back-and-forth several times as shown and remove it from the spindle.

2.Grasp the used ribbon and remove it from the Ribbon Take-Up Spindle.

3.Remove the empty core from the Ribbon Supply Spindle.

4.Follow the Ribbon Loading procedure on page 2-4to load the new rib- bon.

Figure 2.9 Removing Used Ribbon (105Se)

2-12 Zebra S-Series User’s Guide