Clean the stationary cutter blade with a cotton swab moistened with iso- propyl alcohol when it becomes gummed up with label adhesive or paper debris. If the cutter performs unsatisfactorily after it has been cleaned, refer to Volume 1 of the Maintenance Manual.

Figure 6.2 Cleaning the Cutter Blade

Lubrication

CAUTION: Some commercially available lubricants will damage the printer if used.

Lubrication of the Zebra S-Series Printer should be performed by a qualified service technician according to the directions provided in the Volume 1 of the Maintenance Manual (part # 38452L).

6-4

Zebra S-Series User’s Guide