Options

Peel-Off

Your printer may be equipped with the Peel-Off option. In the Peel-Off Mode, only the label backing rewinds onto the Rewind Spindle. The Peel/Tear Bar separates the label from the backing and the Label Available Sensor activates the PAUSE mode to allow the operator to remove a printed label before subsequent labels print.

This option cannot be added to a printer equipped with the optional Cutter.

Cutter Module

Your printer may be factory equipped with a Cutter Module that cuts labels after they have been printed. In addition, an optional Cutter Catch Tray can be added to gather the labels once they have been cut.

Media Rewind

Your printer may be equipped with a Media Rewind Option. This option supports both the Rewind and Peel-Off modes of operation.

In Rewind mode, both labels and backing material rewind internally onto a user-supplied three-inch core. A Rewind Bracket guides the media back to the Rewind Spindle after printing.

This option cannot be added to a printer equipped with the optional Cutter.

(See Peel-Off Option for Peel-Off mode of operation.)

Zebra S-Series User’s Guide

9-1