Installation and Setup
Packing the Printer for Shipment
2.If the printer still has power applied and is turned on, and is still connected to the host computer, set the printer’s power switch (on the back of the printer) to the OFF ( O ) position, and disconnect the interface and power cables to the printer.
3.Open the Main Cover. Open the Print Head Carriage and remove the Ribbon. (If you wish to save the ribbon for future use, you may want to put it in a plastic bag for storage.)
4.Insert the print head protection pad, and close the Print Head Carriage. Remove the Card Cleaning Cartridge and place it in the upper foam insert. Close the Main Cover.
5.Slide the Output Hopper in all the way against the Printer.
6.Place the Printer in its protective plastic bag.
7.Place the lower foam insert in the lower part of the shipping carton.
8.Use both hands to carefully place the Printer into the recess in the lower foam insert.
9.Place the upper foam insert onto the Printer and gently press it down so it makes a snug fit on the Printer; the top of the upper foam insert should be even with the upper edge of the lower part of the shipping carton.
10.Slide the upper part of the shipping carton down over the lower part.
11.Insert and close the handles/latches.
24 | P330i & P330m Card Printer User’s Manual |
