Zebra Technologies PR4T manual P4T Series Cleaning, Mechanism

P4T/RP4T User Guide

P4T Series Cleaning

Manual Introduction	RP4TPrinters 35
			Caution • To avoid possible personal injury or damage to the printer never insert sharp or pointed objects into the printer
			mechanism.
pg.	pg.	Figure 17.1- P4T Series Cleaning
		Tear Edge
4

P4T Overview- pg. 5 Maintenance pg. 36

Printer Preparation pg. 7		Troubleshooting pg.	Gap Sensor
	38

Connecting the Printer pg. 27	Speci†cationspg. 43
	Platen Surface

Printhead

Elements

Media Support Disks

Bar

Sensor

Peeler Bar

Radio Regulatory Information pg. 31 Appendices pg. 46

Index pg. 52

Figure 17.2- Cleaning the P4T Series Peeler Assembly

Label Presence

Sensor

Area	Cleaning Method	Interval
	Use a Zebra cleaning pen to clean the print
PrintheadElements	elements from end to end (the print elements
	are located in the thin gray line on the	After every †ve rolls of media (or more
	printhead).	often, if needed)
Platen Surface	Rotate the platen roller and clean it thoroughly
	with the cleaning pen.
Peeler Bar	Clean thoroughly with the cleaning pen.
Tear Edge
Exterior	Wipe with water-dampened cloth	As needed
Interior	Brush/air blow. Ensure the Bar Sensor, Gap
	Sensor and Label Present Sensor windows and
	the Media Support Disks are free of dust.

37