Zebra Technologies R110Xi, R170Xi Label Specifications

Specifications

Label Specifications

Label Specifications

R110Xi/R170Xi printers need the correct size and type of labels for best performance. Refer to the tables that follow for the specifications.

Important • Media registration and minimum label length are affected by label type and width, ribbon type, print speed, and printer mode of operation. Performance improves as these factors are optimized. Zebrarecommends qualifying any application with thorough testing.

Label Specifications		R110Xi	R170Xi
Minimum label length	Tear-off	0.7 in. (18 mm)*	0.7 in. (18 mm)*
	RFID labels	**	**
Total media width	Minimum	0.79 in. (20 mm)*	2.00 in. (51 mm)
(label + backing, if any)
	Maximum	4.5 in. (114 mm)	7.1 in. (180 mm)
	RFID labels	**	**
Total thickness	Minimum	0.003 in. (0.076 mm)	0.003 in. (0.076 mm)
(includes backing, if any)
	Maximum	0.012 in. (0.305 mm)	0.012 in. (0.305 mm)
Roll media core inside diameter		3 in. (76 mm)	3 in. (76 mm)
Maximum roll diameter on		8.0 in. (203 mm)	8.0 in. (203 mm)
3 in. (76 mm) core
Interlabel gap	Minimum	0.079 in.(2 mm)*
	Preferred	0.118 in. (3 mm)*
	Maximum	No more than the	No more than the
		calibrated length of the	calibrated length of the
		label.	label.
	RFID labels	**	**
Maximum internal fanfold media	R110Xi 200 dpi	8.0×4.5×4.5 in.	8.0×7.1×4.5 in.
pack size (label + backing)		(20×114×114 mm)	(203×114×114 mm)
L × W×H
	R110Xi 300 dpi	8.0×5.5×4.5 in.
		(203×140×114 mm)
Ticket/tag sensing notch L × W		0.12×0.25 in. (3×6 mm)	0.12×0.25 in. (3×6 mm)
Ticket/tag sensing hole diameter		0.125 in. (3 mm)	0.125 in. (3 mm)
Label registration tolerance		± 0.06 in. (± 1.5 mm)	± 0.070 in. (± 1.8 mm)
(vertical)
Label registration tolerance		± 0.06 in. (± 1.5 mm)	± 0.070 in. (± 1.8 mm)
(horizontal)

* Does not apply to RFID labels.

** This parameter varies for each transponder type. For the list of approved transponders, go to http://www.rfid.zebra.com.

148 R110Xi/R170Xi User Guide 23063L-003 Rev. 1 12/6/04