Front Panel Controls

Front Panel LCD

 

 

Table 7 • Standard LCD Displays (Page 5 of 16)

 

 

 

Parameter

 

Action/Explanation

 

 

 

LIST IMAGES

 

List Images

 

 

• Press the right oval to print a label that lists the available images stored in the

 

 

printer’s RAM, Flash memory, optional EPROM, or optional memory card.

 

 

LIST FORMATS

List Formats

 

 

• Press the right oval to print a label that lists the available formats stored in the

 

 

printer’s RAM, Flash memory, optional EPROM, or optional memory card.

 

 

 

LIST SETUP

 

List Setup

 

 

• Press the right oval to print a label that lists the current printer configuration.

 

 

(Same label as shown in Print a Printer Configuration Label on page 32.)

 

 

LIST NETWORK

List Network Settings

 

 

This selection is used to print a network configuration label, which lists the settings

 

 

for the wired ZebraNet PrintServer II (PSII) and the ZebraNet Wireless Print Server

 

 

(if installed).

 

 

• Press the right oval to print a label that lists the current network configuration.

 

 

(Same label as shown in Print a Network Configuration Label on page 34.)

 

 

 

LIST ALL

 

List All

 

 

• Press the right oval to print labels that list the available fonts, bar codes, images,

 

 

formats, and the current printer and network configurations.

 

 

 

FORMAT CARD

 

Format Memory Card

A:

B:

Caution • Perform this operation only when it is necessary to erase all

 

 

previously stored information from the memory card.

1.When the LCD displays INITIALIZE CARD, press the left oval to select the A memory (internal CompactFlash) or the right oval to select B memory (PCMCIA card). (If you are prompted for a password, enter your password using the instructions in Password-Protected Parameters on page 43.)

The front panel LCD asks ARE YOU SURE?.

2.Do you wish to continue?

•Press the left oval to select NO to cancel the request and return to

INITIALIZE CARD prompt.

•Press the right oval to select YES and begin initialization.

FORMATTING CARD displays.

When formatting is complete, INITIALIZE CARD displays.

Note • Depending on the amount of memory in the memory card, initialization may take up to three minutes to complete.

48

R110Xi/R170Xi User Guide

23063L-003 Rev. 1 12/6/04